BBC 496 Stroker Engine 601 HP
Complete Engine - Dyno Tested - w/ Distributor & Wires

-CHEVY FOUR BOLT MAIN BLOCK BORED 4.310 AND PLATE HONED FOR MAX PERFORMANCE, MAINS ARE ALIGN HONED, BLOCK IS MACHINED ON CNC MILL FOR STROKER CRANK. THIS BLOCK IS PREPARED THE SAME AS OUR RACING ENGINES.

-EAGLE OR SCAT 4.250 STROKER KIT, EAGLE OR PRO COMP RODS, 6.385" 4340 H-BEAM RODS, PROBE FORGED PISTONS, AND MOLY RINGS.

-BALANCED AND BLUEPRINTED TO OUR SPECS.

-ENGINE HAS LUNATI OR CRANE .632 LIFT HYD. ROLLER CAM. 

-MELLING HIGH PRESSURE PUMP MELLING TIMING SET.

-STAINLESS STEEL FULL ROLLER ROCKERS 1.7 RATIO.

-THIS ENGINE HAS PRO COMP ALUMINUM HEADS 2.250-1.880 S/S VALVES.

-THIS ENGINE WILL MAKE 601 HP ON 92 OCTANE FUEL, I WILL FURNISH DYNO SHEET FOR ENGINE, ALL ENGINES ARE RUN ON THE DYNO TO VERIFY HP AND TORQUE, WE CAN EMAIL SPEC. SHEET AND DYNO SHEET ON REQUEST.

-ENGINE COMES AS YOU SEE IT IN PICTURE, WITH .850 QUICK FUEL DOUBLE PUMPER.

-ENGINE COMES WITH CROSS WIND ALUMINUM INTAKE OR SINGLE PLANE FOR COMPETITION RUNS.

-NEW HEI DIST., PROCOMP WIRES, CHAMPION PLUGS, ENGINE COMES AS YOU SEE IT WITH A .850 QUICK FUEL DOUBLE PUMPER.

-ENGINE IS READY TO RUN; TIMING IS SET, VALVES ARE ADJUSTED, [WE DO OFFER UPGRADES]

$7500.00

SBC 427 Stroker Engine 600 HP
Complete Engine - Dyno Tested - w/ Distributor & Wires

-DART FOUR BOLT MAIN BLOCK BORED 4.125 AND PLATE HONED FOR MAX PERFORMANCE, MAINS ARE ALIGN HONED, BLOCK IS MACHINED ON CNC MILL FOR STROKER CRANK. THIS BLOCK IS PREPARED THE SAME AS OUR RACING ENGINES.

-EAGLE OR SCAT 4.000 STROKER KIT, EAGLE RODS OR PRO COMP 6.000 LONG H-BEAM RODS, PROBE FORGED PISTONS AND MOLY RINGS.

-BALANCED AND BLUEPRINTED TO OUR SPECS.

-ENGINE HAS LUNATI OR CRANE .615 LIFT HYD. ROLLER CAM. 

-MELLING HIGH PRESSURE PUMP MELLING TIMING SET.

-STAINLESS STEEL FULL ROLLER ROCKERS 1.6 OR 1.5 RATIO.

-THIS ENGINE HAS DART 230 ALUMINUM HEADS 2.08-1.600 S/S VALVES.

-THIS ENGINE WILL MAKE 600 HP ON 92 OCTANE FUEL, I WILL FURNISH DYNO SHEET FOR ENGINE,ALL ENGINES ARE RUN ON THE DYNO TO VARIFY HP AND TORQUE, WE CAN EMAIL SPEC. SHEET AND DYNO SHEET ON REQUEST.

-ENGINE COMES AS YOU SEE IT IN PICTURE, WITH 850 QUICK FUEL DOUBLE PUMPER.

-ENGINE COMES WITH CROSS WIND ALUMINUM INTAKE OR SINGLE PLANE FOR COMPETITION RUNS.

-NEW HEI DIST. ,PROCOMP WIRES, CHAMPION PLUGS, ENGINE COMES AS YOU SEE IT WITH A .850 QUICK FUEL DOUBLE PUMPER.

-ENGINE IS READY TO RUN; TIMING IS SET, VALVES ARE ADJUSTED, [WE DO OFFER UPGRADES]

$8950.00

SBC 383 Stroker Engine 442 HP
Complete Engine - Dyno Tested - w/ Distributor & Wires

-CHEVY 010 BLOCK BORED 4.030 AND PLATE HONED FOR MAX PERFORMANCE, MAINS ARE ALIGN HONED,BLOCK IS MACHINED ON CNC MILL FOR STROKER CRANK. THIS BLOCK IS PREPARED THE SAME AS OUR RACING ENGINES.

-EAGLE OR SCAT 3.750 STROKER KIT, EAGLE RODS OR PRO COMP, 6.000 LONG H-BEAM RODS, PROBE FORGED PISTONS, AND MOLY RINGS

-BALANCED AND BLUE PRINTED TO OUR SPECS.

-ENGINE HAS LUNATI OR CRANE CAM .501 LIFT, WILL FURNISH HYD. ROLLER CAM AT ADDITIONAL COST. 
-MELLING HIGH PRESSURE PUMP MELLING TIMING SET.

-STAINLESS STEEL FULL ROLLER ROCKERS 1.6 OR 1.5 RATIO.

-THIS ENGINE HAS PROCOMP ALUMINUM HEADS 2.02-1.600 S/S VALVES.

-THIS ENGINE WILL MAKE 442 HP, I WILL FURNISH DYNO SHEET FOR ENGINE, ALL ENGINES ARE RUN ON THE DYNO TO VERIFY HP AND TORQUE, WE CAN EMAIL SPEC. SHEET AND DYNO SHEET ON REQUEST.

-ENGINE COMES AS YOU SEE IT IN PICTURE.

-ENGINE COMES WITH CROSS WIND ALUMINUM INTAKE OR SINGLE PLANE FOR COMPETITION RUNS.

-NEW HEI DIST., PROCOMP WIRES, CHAMPION PLUGS, ENGINE COMES AS YOU SEE IT WITH A .750 QUICK FUEL DOUBLE PUMPER.

-ENGINE IS READY TO RUN; TIMING IS SET, VALVES ARE ADJUSTED, [WE DO OFFER UPGRADES]

$3950.00

SBC 406 Stroker Engine 468 HP
Complete Engine - Dyno Tested - w/ Distributor & Wires

-CHEVY FOUR BOLT MAIN BLOCK BORED 4.155 AND PLATE HONED FOR MAX PERFORMANCE, MAINS ARE ALIGN HONED, BLOCK IS MACHINED ON CNC MILL FOR STROKER CRANK. THIS BLOCK IS PREPARED THE SAME AS OUR RACING ENGINES.

-EAGLE OR SCAT 3.750 STROKER KIT, EAGLE RODS OR PRO COMP 5.700 LONG H-BEAM RODS, PROBE FORGED PISTONS, AND MOLY RINGS.

-BALANCED AND BLUE PRINTED TO OUR SPECS.

-ENGINE HAS LUNATI OR CRANE CAM .580 LIFT HYD. ROLLER CAM
 
-MELLING HIGH PRESSURE PUMP MELLING TIMING SET.

-STAINLESS STEEL FULL ROLLER ROCKERS 1.6 OR 1.5 RATIO.

-THIS ENGINE HAS PROCOMP ALUMINUM HEADS 2.02-1.600 S/S VALVES.

-THIS ENGINE WILL MAKE 468 HP, I WILL FURNISH DYNO SHEET FOR ENGINE,ALL ENGINES ARE RUN ON THE DYNO TO VERIFY HP AND TORQUE, WE CAN EMAIL SPEC. SHEET AND DYNO SHEET ON REQUEST.

-ENGINE COMES AS YOU SEE IT IN PICTURE.

-ENGINE COMES WITH CROSS WIND ALUMINUM INTAKE OR SINGLE PLANE FOR COMPETITION RUNS.

-NEW HEI DIST., PROCOMP WIRES, CHAMPION PLUGS, ENGINE COMES AS YOU SEE IT WITH A .750 QUICK FUEL DOUBLE PUMPER.

-ENGINE IS READY TO RUN; TIMING IS SET, VALVES ARE ADJUSTED, [WE DO OFFER UPGRADES]

$4950.00